| SYMBOL | COMPONENTS | DESCRIPTION |
| BNode [+] | Time dependant boundary condition in temperature (signal input) |
| Cylinder [+] | 2D thermal model of a cylinder wall |
| Cylinder_AI [+] | 2D thermal model of a cylinder wall axially Isolated |
| DNode [+] | Diffusive thermal node |
| DNodeMat [+] | Diffusive thermal node with variable properties |
| DNodeRoom [+] | Diffusive thermal node which represents a room with a volume V |
| DNphases [+] | Diffusive thermal node taking into account phase changes |
| FreeConvec_Horizontal_Cylinder [+] | |
| FreeConvec_Plate [+] | |
| FreeConvec_UserDefined [+] | |
| FreeConvec_Wire [+] | |
| FreeConvec_simple [+] | Natural convection from a surface to a simplified fluid |
| GL [+] | Linear thermal conductance |
| GL_mat [+] | Linear thermal conductance with variable properties |
| GR [+] | Radiative thermal conductance with constant REF |
| HeatFlowMultiplier [+] | Heat flow multiplying component |
| Heater [+] | Electrical heater (local or linear). Power dissipation value is given by the external signal |
| Insulation [+] | Thermal insulation |
| Peltier [+] | Thermoelectric heat pump model |
| Periodic_Stop_Control [+] | Device allowing stopping the simulation when the dynamic response of the measured temperature becomes periodic |
| Plate [+] | 2D thermal model of a rectangular plate |
| Q_sensor [+] | Heat flow sensor model |
| Radiator [+] | 2D thermal model of a radiator |
| Saddle [+] | Thermal model of a saddle component used to fasten heat pipes to a surface |
| TD_GL [+] | Linear thermal conductance with table properties |
| T_sensor [+] | Temperature sensor model |
| Tube [+] | Unidimensional wall component | |
| VCHP [+] | Variable Conductance Heat Pipe component |
| View_Factors [+] | Radiative heat transfer model among the nodes by means of the view factors | |
| Wall [+] | 1D thermal model of a wall |
Document generated automatically with EcosimPro Version: 5.4.14 Date: 2015:02:02 Time: 10:24:21