| SYMBOL | COMPONENTS | DESCRIPTION |
| Adsorber [+] | Adsorber |
| Cold_Compressor [+] | Cold compressor |
| Cooler_Heater [+] | Cooler/Heater component |
| Flowmeter [+] | Flowmeter |
| Gas_Tank [+] | Gas tank |
| GeneralSensor [+] | General sensor |
| HighFlowSensor [+] | Discrete massflow sensor with TRUE output when the variable measured is higher than a limit |
| HighPressureSensor [+] | Discrete pressure sensor with TRUE output when the variable measured is higher than a limit |
| HighTemperatureSensor [+] | Discrete temperature sensor with TRUE output when the variable measured is higher than a limit |
| Ideal_Compressor [+] | Ideal compressor |
| Ideal_Pump [+] | Ideal pump |
| LMTD_Wall_2 [+] | Model of a heat exchanger metal wall | |
| LogPressureSensor [+] | Logarithmic pressure sensor |
| LowFlowSensor [+] | Discrete massflow sensor with TRUE output when the variable measured is lower than a limit |
| LowPressureSensor [+] | Discrete pressure sensor with TRUE output when the variable measured is lower than a limit |
| LowTemperatureSensor [+] | Discrete temperature sensor with TRUE output when the variable measured is lower than a limit |
| Mhex_2 [+] | Model of a heat exchanger with one cold stream and one hot stream |
| Mhex_2HP_1LP [+] | Model of a heat exchanger with three streams : 2HP (hot) and 1LP (cold). LP in counterflow |
| Mhex_3 [+] | Model of a multistream heat exchanger with three streams 2 hots (HP and MP) 1 cold (LP). LP in counterflow |
| Mhex_5 [+] | Model of a multistream heat exchanger with three streams 1 hot (HP) and 2 colds (MP and LP). MP and LP in counterflow |
| PIPE [+] | Pipe 0D |
| Phase_Sep_Serp [+] | Vertical liquid-vapor separator with one inlet and one outlet and an electrical heater. It embeds an electrical heater and a serpentine inside the liquid phase |
| Phase_Sep_b [+] | Vertical liquid-vapor separator with one inlet and two outlets and an electrical heater |
| Phase_Sep_c [+] | Vertical liquid-vapor separator with two inlets and two outlets and an electrical heater |
| Pipe_1D [+] | Pipe 1D |
| PressureSensor [+] | Pressure sensor |
| Prim_Turbo_Pump [+] | Primary/Turbo pump |
| Pump [+] | Pump model. The dimensionless pump performances cover all zones of speed and flow |
| Screw_Compressor [+] | Oil lubricated screw compressor |
| Sink_PT [+] | Fluid sink |
| Sink_mT [+] | Fluid sink |
| Source_PT [+] | Fluid source |
| Source_mT [+] | Fluid source |
| Stream [+] | Stream of a multistream heat exchanger | |
| TemperatureSensor [+] | Temperature sensor |
| Thermal_load [+] | Thermal load |
| Turbine [+] | Turbine |
| Turbine2 [+] | Turbine with a brake |
| Valve [+] | Normal valve |
| Valve_OnOff [+] | On-off valve |
| Valve_local [+] | Local valve |
| Volume [+] | Volume |
| WorkingFluid [+] | This component specifies the working fluid in a loop of a model |
Document generated automatically with EcosimPro Version: 5.4.14 Date: 2015:02:02 Time: 12:52:58