/ File opened for write Wed Apr 13 06:17:09 2005.
 
*** LISTING "espaceura" FILES IN DIRECTORY:
    .
 
    espaceurA.dbs
    espaceurA.jou
    espaceura.lok
    espaceurA.msh
    espaceurA.trn
Command> vertex create coordinates 132 402 0
Created vertex: vertex.116
Command> vertex create coordinates 336 380 0
Created vertex: vertex.117
Command> vertex create coordinates 193 463 0
Created vertex: vertex.118
Command> vertex create coordinates 132 385 0
Created vertex: vertex.119
Command> vertex create coordinates 276 415 0
Created vertex: vertex.120
Command> vertex create coordinates 318 390 0
Created vertex: vertex.121
Command> vertex create coordinates 233 439 0
Created vertex: vertex.122
Command> vertex create coordinates 229 427 0
Created vertex: vertex.123
Command> vertex create coordinates 226 427 0
Created vertex: vertex.124
Command> vertex create coordinates 235 390 0
Created vertex: vertex.125
Command> vertex create coordinates 233 389 0
Created vertex: vertex.126
Command> vertex create coordinates 275 365 0
Created vertex: vertex.127
Command> vertex create coordinates 275 362 0
Created vertex: vertex.128
Command> vertex create coordinates 310 380 0
Created vertex: vertex.129
Command> vertex create coordinates 311.5 378.5 0
Created vertex: vertex.130
Command> vertex delete "vertex.119" "vertex.116"
Deleted vertex: vertex.119
Deleted vertex: vertex.116
Command> vertex create coordinates 130 390 0
Created vertex: vertex.131
Command> vertex create coordinates 130 385 0
Created vertex: vertex.132
Command> vertex delete "vertex.131"
Deleted vertex: vertex.131
Command> vertex create coordinates 336 323 0
Created vertex: vertex.133
ERROR: Entity vertex.133 currently exists in the select list.
Command> edge create straight "vertex.7" "vertex.133" "vertex.117"
Created edge: edge.109
Created edge: edge.110
Command> edge create straight "vertex.117" "vertex.121"
Created edge: edge.111
ERROR: Entity vertex.132 currently exists in the select list.
ERROR: Entity vertex.118 currently exists in the select list.
Command> edge create straight "vertex.10" "vertex.132" "vertex.118" "vertex.122"
Created edge: edge.112
Created edge: edge.113
Created edge: edge.114
Command> edge create straight "vertex.123" "vertex.124"
Created edge: edge.115
Command> edge create straight "vertex.126" "vertex.125"
Created edge: edge.116
Command> edge create straight "vertex.127" "vertex.128"
Created edge: edge.117
Command> edge create straight "vertex.129" "vertex.130"
Created edge: edge.118
Command> edge create center2points "vertex.120" "vertex.121" "vertex.129" minarc arc
WARN:  The two points are at different radius. A spiral arc is created.
Created edge: edge.119
Command> edge create center2points "vertex.120" "vertex.130" "vertex.128" minarc arc
WARN:  The two points are at different radius. A spiral arc is created.
Created edge: edge.120
Command> edge create center2points "vertex.120" "vertex.127" "vertex.125" minarc arc
WARN:  The two points are at different radius. A spiral arc is created.
Created edge: edge.121
Command> edge create center2points "vertex.120" "vertex.126" "vertex.124" minarc arc
WARN:  The two points are at different radius. A spiral arc is created.
Created edge: edge.122
Command> edge create center2points "vertex.120" "vertex.123" "vertex.122" minarc arc
WARN:  The two points are at different radius. A spiral arc is created.
Created edge: edge.123
Command> vertex delete "vertex.120"
Deleted vertex: vertex.120
Command> face create wireframe "edge.4" "edge.109" "edge.110" "edge.111" "edge.119" \
  "edge.118" "edge.120" "edge.117" "edge.121" "edge.122" "edge.116" \
  "edge.115" "edge.123" "edge.114" "edge.113" "edge.112" "edge.6" "edge.5" \
  real
Created face: face.5
Command> face connect "espaceur" "face.5" real
WARN:  The call to connect on list of faces resulted in no actual
connect operations.
Command> undo begingroup
Command> edge picklink "edge.109"
Command> edge mesh "edge.109" successive ratio1 1 intervals 6
Mesh generated for edge edge.109:   mesh edges = 6.
Command> undo endgroup
Command> undo begingroup
Command> edge picklink "edge.110"
Command> edge mesh "edge.110" successive ratio1 1 intervals 20
Mesh generated for edge edge.110:   mesh edges = 20.
Command> undo endgroup
Command> undo
Undone to: undo begingroup.  
Command> undo
Undone to: undo begingroup.  
Command> undo begingroup
Command> face delete "face.5" onlymesh
Command> face mesh "face.5" pave size 2
Mesh generated for face face.5:   mesh faces = 2487.
Command> undo endgroup
Command> physics create "HAUT_ESPACEUR" ctype "SOLID" face "face.5"
Created Continuum entity: HAUT_ESPACEUR
Command> physics create "E" btype "WALL" edge "edge.119" "edge.121" "edge.123"
Created Boundary entity: E
Command> export fluent5 "espaceura_e.msh" nozval
A default (unspecified) boundary entity was created.
Mesh was successfully written to espaceura_e.msh.
Command> end
/ File closed at Wed Apr 13 07:05:56 2005, 14.86 cpu second(s), 6168352 maximum memory.
Total of 16.41 cpu second(s), 6168352 maximum memory.