STEP translation to Solid Edge
Date: lundi,mars 13,2017 07:06
Source File: C:\3d\support\Stand_vincent.step
Author: Unknown
Organization: Unknown
Source System: Autodesk Translation Framework v5.2.0.2920

Hardware:
Processor: Intel(R) Core(TM) i5-4590 CPU @ 3.30GHz
Operating System: Windows 8 Professional
Installed Memory: 15.86 GB

Software Information
Parasolid Version: 28.0.208
PSBodyShop Version: 28.0.80
Step Adapter Version: 1.0.1046
Solid Edge Version: 108.00.10.003 x64

Step Import Options
Import Faceted Bodies: On
Import Check Bodies: Off
Import Curves: On
Import DoNotSave: On
Import Multiple Bodies As Single Part File: On
Import Stitch Surfaces: On
Import Boolean Solids: On
Make Base Feature: On
Simplify Geometry: On
Import Imprint Curves: On
Import Drive: C:
Import Stitch Surfaces: On
Import Surfaces: On
Import Output Path: C:\3d\support
Import Enable Default Output Path: On
Import Path: 

Translating to Parasolid data types...
+Begin Assembly: 1
+Created SE Assembly File C:\3d\support\Stand_vincent_0.asm
|--+Begin Assembly: 2
|--+Created SE Assembly File C:\3d\support\Jack stand v1_0.asm
|  |--+Created SE Part File C:\3d\support\510201-10x100;_0.par
|  |--+Created SE Part File C:\3d\support\Stand;_0.par
|  |--+Created SE Part File C:\3d\support\Nut;_0.par
|  |--+Created SE Part File C:\3d\support\Nut; (1)_0.par
|  |--+Created SE Part File C:\3d\support\Upper part;_0.par
|  |--+Reusing File C:\3d\support\510201-10x100;.par
|  |--+Reusing File C:\3d\support\510201-10x100;.par
|  |--+Begin Assembly: 3
|  |--+Created SE Assembly File C:\3d\support\Pattern_0.asm
|  |  |--+Begin Assembly: 4
|  |  |--+Created SE Assembly File C:\3d\support\Wiberger-tn2470_bc_75_0.asm
|  |  |  |--+Created SE Part File C:\3d\support\2;NONE_0.par
|  |  |  |--+Created SE Part File C:\3d\support\1;NONE_0.par
|  |  |--+Total Parts: 4
|  |  |--+Assemblies: 0
|  |  |--+Solid Bodies: 4
|  |  |--+Sheet Bodies: 0
|  |  |--+End Assembly: 4
|  |  |--+Begin Assembly: 4
|  |  |--+Reusing File C:\3d\support\Wiberger-tn2470_bc_75.asm
|  |  |--+Total Parts: 0
|  |  |--+Assemblies: 0
|  |  |--+Solid Bodies: 0
|  |  |--+Sheet Bodies: 0
|  |  |--+End Assembly: 4
|  |  |--+Begin Assembly: 4
|  |  |--+Reusing File C:\3d\support\Wiberger-tn2470_bc_75.asm
|  |  |--+Total Parts: 0
|  |  |--+Assemblies: 0
|  |  |--+Solid Bodies: 0
|  |  |--+Sheet Bodies: 0
|  |  |--+End Assembly: 4
|  |--+Total Parts: 1
|  |--+Assemblies: 1
|  |--+Solid Bodies: 0
|  |--+Sheet Bodies: 0
|  |--+End Assembly: 3
|  |--+Created SE Part File C:\3d\support\Center Support_0.par
|  |--+Begin Assembly: 3
|  |--+Created SE Assembly File C:\3d\support\V Bracket Assembly_0.asm
|  |  |--+Created SE Part File C:\3d\support\Pipe V Brkt_0.par
|  |  |--+Reusing File C:\3d\support\Pipe V Brkt.par
|  |  |--+Created SE Part File C:\3d\support\Pipe V Brkt Base_0.par
|  |  |--+Created SE Part File C:\3d\support\Acme Rod_0.par
|  |--+Total Parts: 7
|  |--+Assemblies: 0
|  |--+Solid Bodies: 7
|  |--+Sheet Bodies: 0
|  |--+End Assembly: 3
|  |--+Created SE Part File C:\3d\support\Acme Wing Nut_0.par
Bodies: 0
|  |--+Created SE Part File C:\3d\support\Pipe Jack Stand v1_0.par
Bodies: 0
|--+Total Parts: 18
|--+Assemblies: 2
|--+Solid Bodies: 12
|--+Sheet Bodies: 4
|--+End Assembly: 2
+Total Parts: 1
+Assemblies: 1
+Solid Bodies: 0
+Sheet Bodies: 0
+End Assembly: 1
Translation process completed
Total time required to translate and post process:00 : 00 : 35